If the zone closes after the system is fully armed, it will then become an active part of the system. Option 5: Force Arming/No Force Arming – If this option is ON, the system will ignore the zone when the system is being armed, thus allowing it to be armed even if the zone is open. A zone defined as Fire, for example, would have this option turned off, since allowing a fire zone to be bypassed would be unsafe. If it is OFF, the zone cannot be bypassed.
Option 4: Bypass/No Bypass – If this option is ON, the end user will be able to bypass the zone. If Chime is not turned on, no zones will chime, regardless of how this option is set.
In order for this option to function, the Chime feature must be turned on at the keypad. If it is off, the zone will not generate chimes. Option 3: Chime/No Chime – If this option is ON, the zone will cause the keypads to “chime” (or beep) every time the zone trips, whether the system is armed or not. Obviously, if option 1 ( Audible/Silent) is OFF, option 2 has no effect. This is typically how the siren separates burglary (steady) from fire (pulsed) signals.
If it is OFF, the Bell Output voltage will follow a pulsing on/off pattern. Option 2: Steady/Pulsed – If this option is ON, the Bell Output (siren) will provide continuous voltage until the Bell Cutoff times out. This has no effect on whether the communicator dials out. Option 1: Audible/Silent - If this option is ON, the siren will sound when the zone is in alarm. The one exception, of course, is the use of wireless sensors we'll discuss that later, but at this point, our best advice is “Step away from the Zone Attributes!”įor each zone, there are twelve attributes that are part of the zone definition. This is not only unnecessary, but likely to cause lots of problems. We have seen numerous posts on the forum from beginners who have the mistaken notion that they need to manually set the attributes for each zone. That area is “Zone Attributes.” Zone attributes are specific options that help determine how each definition functions, and they are automatically set as soon as the zone is defined. There is another area of programming that is closely related to the zone definitions, and it is often misunderstood, especially by first-time installers. These different behaviors are set up in a section of programming known as “Zone Definitions.” It's difficult to think of a definition that isn't available, although it seems that with each new panel version, a couple of new ones appear. Notice: JavaScript is required for this content.Like most modern systems, DSC alarm panels give the installer great flexibility in determining exactly how each zone should behave. To schedule a no obligation assessment of your facility’s security needs call us at 1 8, email or fill out the contact form below.
#Dsc alarm panel programming full#
If you have a Full Message LCD Keypad, use the keys to scroll to the menu options and press *.Press 1 to Select Time and Date programming.
#Dsc alarm panel programming how to#
The instructions provided below will walk you through how to perform this task for a DSC Power Series Neo and DSC Power Series security alarm keypad. As with various other electronic devices in your home or business, you may need to periodically change the date and time on your security alarm keypad.
0 kommentar(er)
